Equipment processing capacity

Inlet material parameter

(1) Shear material: cold-rolled coil

(2) Strip thickness: 0.3~3.0mm

(3) Strip width: 200~1850mm

(4) Inner diameter of steel coil: Φ508mm (with uncoiled rubber sleeve expanded to Φ610mm)

(5) Steel coil outer diameter: Φ1000~2100mm (Max)

(6) Steel coil weight: 25t (Max)

Exit material parameter

(1) Inner diameter of coil: Φ508mm (with nylon pad to expand to Φ610mm)

(2) Roll diameter: Φ2100mm(Max)

(3) Roll weight: 25t (Max)

(4) Width tolerance: ≤+0.05mm (new grinding blade thickness and parallelism tolerance: 3/1000M/MT, cutting 300 tons or less 1.0mm plate thickness)

(5) Burr tolerance: ≤3% plate thickness, but not less than 0.02mm (new grinding blade thickness and parallelism tolerance: 3/1000M/MT, cutting 300 tons less than 1.0mm plate thickness)

Slitting capacity

40 pieces (plate thickness less than 1.0mm, line speed 200 m/min)

30 pieces (plate thickness 1.1-2.0mm, line speed 100m/min)

20 pieces (plate thickness 2.1-2.5mm, line speed 100m/min)

10 pieces (plate thickness 2.5-3.0mm, line speed 100m/min)

Unit nominal speed

0~100 m/min (slow)

0~200m/min (fast speed)

Cutting width

Maximum width 22mm

Sickle bend

≤土0.8mm/m

Piercing speed

15~20 m/min